Car Tint Aftercare Guide
Your new tint looks its best when it is cared for correctly — especially in the first week while the film cures. This guide covers what to do, what is perfectly normal, and what to avoid, so your film stays clear, bonded, and looking sharp for years.
The one rule that matters most
Right after installation, the film needs time to cure — the moisture used during fitting has to dry out and the adhesive has to bond fully to the glass. During this period the film is at its most delicate, so a little patience now protects the result for years.
Keep windows up for the first few days
Do not roll your windows down while the film is curing. Rolling them too early can catch the edge of the film and lift or shift it. We confirm the exact curing time for your vehicle and the current conditions at handover — follow that timing and you are on the safe side.
Your first week, step by step
Here is roughly what to expect and do after you drive away. Treat this as a general guide — always follow the specific timing we give you at handover.
- Day of installation — leave the windows up. Do not clean the inside of the glass or touch the film. Some haze and small water pockets are expected.
- First few days (curing) — keep windows up throughout. You may still see slight cloudiness or tiny water bubbles; this is normal and clears as the film dries.
- Around mid-week — most haze and moisture should be visibly clearing as the adhesive bonds. Continue to avoid cleaning the film.
- After the curing period we confirm — once we have given the all-clear time, you can begin rolling windows down normally.
- First cleaning — only after full curing, clean the inside gently with a soft microfibre cloth and an ammonia-free cleaner.
Care for your tint the right way
Simple habits that keep your film clear, bonded, and looking new.
Do
Keep windows up during curing, wait for our all-clear before cleaning, use a soft microfibre cloth, choose an ammonia-free glass cleaner, and let small water pockets clear on their own.
Don't
Don't roll windows down early, don't use ammonia-based cleaners, don't scrub with paper towels or abrasive sponges, don't stick suction mounts or decals on the film, and don't try to press out bubbles.
Watch For
It's normal to see slight haze and tiny water pockets early on. Keep an eye on them — they should fade as the film cures. If large bubbles or lifting remain after curing, let us know.
How to clean tinted glass safely
Once the film has fully cured, keeping it clean is easy — the key is being gentle and using the right products:
- Use a clean, soft microfibre cloth — never paper towels, rough sponges, or abrasive scourers
- Choose an ammonia-free glass cleaner; ammonia can degrade and discolour the film over time
- Spray the cloth rather than blasting cleaner directly at window edges
- Wipe gently in a straight motion; there is no need to scrub
- Take extra care near the edges, where the film meets the frame
If you are ever unsure which product is safe, a plain damp microfibre cloth is a reliable option for day-to-day smudges.
When to contact us
Most early haze and small water pockets sort themselves out during curing. Reach out to us if, after the curing period we confirmed, you notice any of the following:
- Large bubbles or pockets that have not cleared
- Edges lifting, peeling, or catching
- Persistent cloudiness or haze that does not fade
- Any cracking or unexpected marks in the film
Send us a message on WhatsApp with a couple of clear photos and your vehicle details — we will take a look and advise. If your film is within warranty, see our warranty guide for how claims work.
Aftercare questions
Keep the windows up for the first few days while the film cures and bonds to the glass. Rolling them down too early can lift or shift the film. We confirm the exact time for your vehicle and conditions at handover.
A slight haze, cloudiness, or small water pockets are completely normal in the first days. This is moisture trapped as the film cures, and it clears on its own as the film dries and bonds. Do not try to press or squeeze it out.
Wait until the film has fully cured, then clean with a soft microfibre cloth and an ammonia-free glass cleaner. Avoid abrasive tools, rough sponges, paper towels, and harsh chemicals, which can scratch or damage the film.
Small water pockets in the first week are normal and usually disappear as the film cures. If large bubbles, lifting edges, or haze remain well after the curing period, contact us so we can take a look.
Avoid rolling windows down during the curing period, cleaning with ammonia-based products, using abrasive tools, and sticking anything to the film. Give the film time to cure before washing the inside of the glass.
Not sure about something with your new tint?
Send us a quick message any time — we are open 24 hours and happy to help you get the most out of your film.